Figure 4-15. Hydraulic oil reservoir, removal, disassembly, reassembly, and installation.

Custom Search

Figure 4-14. Hydraulic starting system reservoir (hulls 8540-8560 and 8560-8618).

TM-55-1905-217-34 Landing Craft Mechanized; Steel; DED; Overait Length 74 Feet Mod 1 Marl VIII Navy Design LCM-8 Manual

Hydraulic Starting Motor

TM 55-1905-217-34

Figure 4-15. Hydraulic oil reservoir, removal, disassembly, reassembly, and installation.

(3) Remove the breather (5) , strainer screen (6) , and plug (7).

c. Cleaning, Inspection, and Repair.

(1) Clean all parts of the hydraulic oil reservoir with cleaning solvent (FED. SPEC. PD- 680) and dry

thoroughly.

(2) Inspect all parts for cracks, corrosion, dents, and defective or missing hardware.

(3) Straighten dents; weld minor cracks and breaks.

WARNING

Be sure tank is filled with sand or water before attempting

any welding.

(4) Replace defective parts as necessary.

(5) Replace a hydraulic oil reservoir that is damaged beyond repair.

d. Reassembly and Installation.

(1) Install the plug (7, fig. 4-15) , strainer screen (6) , and breather (5).

Change 1

4-25