| Tweet |
Custom Search
|
|
|
|||||
|
|||||
 TM 55-1905-219-14-1
CHAPTER 1 INTRODUCTION
Section I. GENERAL INFORMATION
1-1.
SCOPE.
This manual covers Landing Craft Utility, LCU 1667 - 1670 manufactured by General Ship and Engine Works,
East Boston, Massachusetts. See Figure FO-1 for an overall view of the landing craft.
This manual contains operating and maintenance instructions for the crew. Also included is Direct Support
Maintenance Instructions.
This manual consists of ten volumes containing five chapters. Refer to the Table of Contents in this volume for an
overall outline of the various volumes and their contents. Each section within a chapter will have a table of contents
indicating the page on which a particular paragraph begins.
1-2
MAINTENANCE FORMS, RECORDS AND REPORTS.
Department of the Army (DA) forms and procedures used for equipment maintenance will be those prescribed by
DA Pam 38-750, The Army Maintenance Management System (TAMMS).
1-3
DESTRUCTION OF ARMY MATERIAL TO PREVENT ENEMY USE.
Procedures for destroying Army materiel to prevent enemy use are listed in TM 750-244-3.
1-4
REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIR).
If your Landing Craft needs improvement, l us know. Send us an EIR. You, the user, are the only one who can
tell us what you do not like about your equipment. Let us know why you do not like the design. Tell us why a procedure is
had to perform. Put it on an SF 368 (Quality Deficiency Report). Mail it to us at: Commander, US Army Aviation and
Troop Command, ATTN: AMSAT-D-WTT, 4300 Goodfellow Blvd., St. Louis, MO 63120-1798.
1-5
NOMENCLATURE CROSS REFERENCE.
For nomenclature used in Army watercraft, refer to the following:
TM 55-501 Marine Crewman's Handbook
TM 55-509 Marine Engineman's Handbook
Change 5 1-1
|
|||||
|
|||||
