| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-1
Table 2-1. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - continued
Location
Item
Item to Check/
Not Mission
No.
Interval
Service
Procedure
Capable :
183
*ANNUAL
Engine Room
CHANGE THE HYDRAULIC FLUID.
This should be done by first operating the
hydraulic system until the hydraulic fluid is
warm. Then stop the pump unit and remove
drain pug (4) located beneath the hydraulic
reservoir (1). Drain the hydraulic fluid into a
suitable container.
NOTE
Do not drain oil into bilges. Use
the oil separation and recovery
system to collect drained oil.
Remove the access plate (5) and clean sump
with a clean cloth. Remove hydraulic
strainer (6) and clean with diesel oil.
Reinstall hydraulic strainer (6) and access
plate (5).
* Change hydraulic flue after the first month of operation and once a year for hard continuous service or every two years
with light service.
2-226 Change 4
|
||
|
||
