| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-10
5-35. BLOWER - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL - ASSEMBLY (Cont)
CAUTION
The horizontal oil passage in the top front face of the front end
plate that intersects the vertical oil passage is plugged. Do not
install this end plate on the rear end of the blower housing.
2. The front end plate
should be attached to
the front end of the
blower housing first.
The rear end plate
is attached to the
blower housing after
the rotors are in
place. Attach the
front end plate to
the blower housing
as follows:
d. Dowel pins
Check the dowel pins.
(55)
The dowel pins must
project .380 inch from
the flat inner face of
the front end plate to
assure proper alignment
of the end plate with
the housing.
e. Blower
1. Place the blower
housing
housing on a bench
(50), and
with the top side
front end
of the housing up,
plate (47)
and the front end
of the housing
facing the outside
of the bench.
5-566
|
||
|
||
