| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-2
2-46. ANCHOR WINCH AND "A" FRAME.
a.
The procedures in these paragraphs are: Starting and stopping the anchor winch engine both locally and remote,
pay-out and in-haul of the anchor.
b.
Shore power, or ships power to the landing craft, must be available in order to start the engine. Refer to Chapter
c.
The following is an index to the procedures:
DESCRIPTION
PARAGRAPH
Anchor Winch Engine-Local-Start/Stop-Warm Weather
Anchor Winch Engine-Local-Start/Stop-Cold Weather
Anchor Winch-Remote Operation and Payout
Anchor Winch-Anchor Inhaul
Anchor Winch-Stop
2-47. ANCHOR WINCH ENGINE - LOCAL-START/STOP-WARM WEATHER.
NOTE
Shore power or ships power is required.
a.
Perform all before operations on the Preventive Maintenance Checks and Services Chart.
NOTE
Position all shut off valves open (counter-clockwise).
b.
Operate hand pump (1) on hydrostarter in anchor winch compartment to charge accumulator (2).
c.
Pressure gage (3) should read:
AMBIENT TEMPERATURE
GAGE READING
Above 40 (4.4 )
F
C
1500 psi (1054.5 kg sq cm)
40 to 0 (4.4 to -17.8 )
F
F
C
C
2500 psi (1757.5 kg sq cm)
Below 0 (-17.8 )
F
C
3300 psi (2319.9 kg sq cm)
2-292
|
||
|
||
