| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-2
2-73.
FRESH WATER SYSTEM (Cont).
3
The pump will run.
4
Check the system for open spigots, hose connections and leaks.
5
Both the cold water and hot water tanks will fill.
6
Open each spigot and hose connection. Let any trapped air escape. When water runs shut the spigot
or hose connection.
7
Observe the pump. An automatic control will shut the pump off.
NOTE
The pump should run only when a tank requires filling or a spigot or hose connection is open. If the
pump does not shut off, check the system.
(b) To Start the Hot Water Heater:
Place circuit breaker #1 on power distribution panel (P408) in the ON position.
2-385
|
||
|
||
