| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-5
3-91.3. IDLER GEAR AND BEARING ASSEMBLY - MAINTENANCE
INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARKS
DISASSEMBLY (Cont)
c. Bearing
Place the idler gear and
hub (10)
bearing assembly (9) in
an arbor press with the
bearing cone or inner
race supported on steel
blocks as shown. While
rotating the gear assem-
bly (9) press the hub
(10) out of the bearing.
Remove the gear assembly
from the arbor press and
remove the bearing cones
and spacer (11).
NOTE
Component parts of the idler gear bearing are mated; therefore, match-mark the
parts during disassembly to assure they will be reassembled in their original
positions.
d. Dowel
Remove.
(12)
3-1575
|
||
|
||
