| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-7
3-171.4. Cylinder liner - maintenance instructions (Continued).
LOCATION
ITEM
ACTION
REMARKS
INSPECTION (Cont)
NOTE
The numbers on the side of the connecting rod and cap identify the rod with the cap and
indicates the particular cylinder in which they are used. If a new service connecting rod is to be
installed, the same identification numbers must be stamped in the same location as on the
connecting rod that was replaced.
2.
Push piston and connecting
rod assembly down into the
liner until the piston is
free of the ring compressor.
Do not force the piston into the liner. The peripheral abutment type expanders apply consid-
erable more force on the oil ring than the standard expander. Therefore, extra care must be
taken during the loading operation to prevent ring breakage.
g Connecting
1. Remove.
rod
cap
2. Push piston down until
and
the compression rings
ring
pass cylinder liner ports.
3-2977
|
||
|
||
