| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-1
Table 2-1. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - continued
Item
Location Item to
Not Mission
No
Interval
Check/Service
Procedure
Capable If :
110
MONTHLY
Anchor Winch
CHANGE ENGINE OIL. Pump oil
Low oil level.
Compartment
into a suitable container
through
dipstick hole (4).
NOTE
Do not drain oil into bilges.
Use oil separation/recovery
system to collect used oil.
111
MONTHLY
Anchor Winch
OIL FILTER. Remove pipe plug (5)
Filter
Compartment
and drain oil into a suitable container.
obstructed.
NOTE
Do not drain oil into bilges.
Use oil separation system
to collect used oil.
Loosen oil filter stud (6) and oil filter
Filter
shell (7). Remove gasket (8) and
obstructed.
filter (9). Install a new filter (9) and
gasket (8) into oil filter shell (7).
Tighten stud (6). Replace drain plug
(5).
NOTE
Also, do oil filter by-pass. It
is located on the left side.
Refer to Item 94.
Change 5
2-170
|
||
|
||
