| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-1
Table 2-1. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - continued
Location
Item
Item To Check/
Not Fully Mission
No
Interval
Service
Procedure
Capable If :
182
ANNUAL
Anchor Winch
HYDRAULIC TANK DRAIN. Drain
Compartment
the Hydraulic Tank (35) by removing
drain plug (36). Drain the oil into a
suitable container.
NOTE
Do not drain oil into bilges.
Use oil separation/recovery
system to collect the
drained oil.
Remove screws (37), washers (38),
cover (39) and gasket (40).
Unscrew strainer (41). Clean with
fuel oil and dry with compressed air.
WARNING
Use eye protection when
using compressed air.
Clean inside of hydraulic tank with
clean cloths.
Replace strainer (41). Using a new
gasket (40), replace cover (39),
washers (38) and screws (37).
Replace drain plug (36). Remove
breather filler cap (42) and fill the
tank with oil (MIL-H-46170, FRH,
Type 1). The system uses 55 gallons
(208.18 liters) of oil.
Measure the level of fluid on the
upper sight glass (43). Add oil if
required.
Change 5 2-236
|
||
|
||
