| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-10
5-7. VARIABLE SPEED MECHANICAL GOVERNOR - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL - REASSEMBLY (Cont)
10. Variable
a. Speed
1. Lubricate the needle
speed
control
bearings with Shell
spring
lever
Alvania No. 2 grease,
housing
shaft
or equivalent.
needle
bearing
2. Start one of the
(40 and
bearings, numbered
48)
end up, straight in
the bearing bore in
the right hand side
of the spring housing
as shown below.
3. Place the pilot rod
Use tool J9196.
end of the bearing
installer assembly in
the bearing.
4. Support the spring
housing, bearing and
installer on a short
sleeve on the bed of
an arbor press as
shown below, then
press the bearing in
the housing until
the shoulder on the
installer contacts
the housing.
5-210
|
||
|
||
