| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-2
2-28. FUEL SYSTEM.
a. The procedure contained in this paragraph must be performed prior to starting the propulsion engines, generator
engines, or anchor winch engine. Refer to FO-34 for orientation.
(1)
Open supply valves (1) in the forward engine room by rotating valve counter-clockwise.
NOTE
The supply valves can be opened by rotating the reach rods (2) counter-clockwise.
(2)
Remove deck plates in forward engine room at frame 49 Starboard, 2 feet 9 inches (83.8 cm) from
centerline.
(3)
Place crossover valve (3) as follows:
(a)
Starboard - Fuel oil will be taken from starboard tank and returned to the starboard tank.
(b)
Port - Fuel oil will be taken from the port tank and returned to the port tank.
(4)
Open shut off valves as follows:
(a)
Port Propulsion Engine - Open valve (4) by rotating counter clockwise.
(b)
Starboard Generator Engine - Open valve (5) by rotating counter-clockwise.
(c)
Isolation Valve - Open valve (6) by rotating counter-clockwise.
(d)
Starboard Propulsion Engine - Open valve (7) by rotating counter-clockwise.
(e)
Port Generating Engine - Open valve (8) by rotating counter-clockwise.
(f)
Anchor Winch Engine - Open valve (9) by rotating counter -clockwise.
(5)
The return line can operate in either of two modes.
(a)
Direct:
1
Open bypass valve (10) by rotating counter-clockwise.
2
Close shut off valves (11) by rotating clock-wise.
2-352
|
||
|
||
