| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-5
3-68. BLOWER - MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARKS
INSPECTION (Cont)
2. Inspect for breaks,
dents, cracks or
damage.
3. Inspect for loose
mounting hardware.
2.
Blower
a. Oil fill
Inspect for leaks,
drive
pipe
breaks and damage.
support
b. Housing
1. Inspect for breaks,
cracks and damage.
2. Inspect for leaking
oil.
3. Inspect for tight
hardware.
c.
Hoses
Inspect for wear, breaks,
or defects.
d. Tubing
Inspect for breaks, bends,
or damage.
3.
Blower
(Engine
running)
NOTE
The air intake (paragraph 3-67.) and the emergency
shutdown solenoid (paragraph 3-65.) must be
removed to perform the following inspections.
When inspecting a blower on an engine with the
engine running, keep fingers and clothing away from
the moving parts of the blower and run the engine at
low speeds only.
3-1219
|
||
|
||
