| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-6
3-139.1. HYDRAULIC PUMP - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
t. Thrust
Assemble.
1. Tap together
plate
with inserted
(24)
pocket shield
and
(26) over the
port
bearing races
end
in the port
cover
end cover. Use
(22)
a soft hammer.
2. Be sure a
small clearance
(1/32 inch
(0.079 cm), is
left between
the thrust
plate and the
face of the
Port end cover.
u. Four
Insert four pocket
1. Use pocket
pocket
seals cut to 7/16
seal K3026-3.
Seals
inch (1.113 cm)
(25)
into the four slots
2. Make sure
underneath the
they are pushed
thrust plate.
completely into
the grooves so
that the inner
ends are flush
against the
bearing races.
v. Thrust
Tap down tightly against
Use a soft
plate
port end cover (22).
hammer.
(24)
w. Pocket
Trim the excess lengths
Use a pocket
seals
of each pocket seal so
knife or razor
(25)
that they are flush
blade.
and
with the thrust plate.
(26)
3-2304
|
||
|
||
