| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-1
4-58. ENGINE SPEED GOVERNOR (Continued).
Location/Item
Action
Remarks
ADJUSTMENT (Cont)
f.
Check the gap between the low
speed spring cap (10), and
the high speed spring plunger
(11) with gage J5407, 0.170
inch.
g. If required, loosen the
locknut (12) and turn the
gap adjusting screw (13)
until a slight drag is felt
on the gage J5407 (14).
h. Hold the adjusting screw, and
tighten the locknut.
i.
Recheck gap and readjust if
necessary.
j.
Install the fuel rod (8)
between the governor and
injector control tube lever.
Install governor cover (7) and
lever assembly.
4-237
|
||
|
||
