| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-2
5-5.4. ENGINE CONTROL UNIT (Continued).
LOCATION/ITEM
ACTION
REMARKS
CLEANING
2.
WARNING
Dry cleaning solvent, P-D- 680, used to clean parts, is potentially dangerous to
personnel and property. Avoid repeated or prolonged skin contact. Do not use
near open flame or excessive heat. Flash point of solvent is 100 - F (38 -
138
59 ).
C
Clean all metal parts (except bearings), with
cleaning solvent P-D-680 and dry thoroughly.
REPAIR/REPLACE
3.
a.
Remove detent plug (1),
spring (2), ball bearing (3),
and lockwasher (4).
b.
Remove lubrication fitting (5).
c.
Remove cotter pin (6).
d.
Remove retaining rng (7),
i
and bearing retainer (8).
e.
Remove retaining ring (9),
and bearing cap (10).
f.
Remove four screws (11),
and lockwashers (12).
g.
Remove side (13), and gasket
(14).
h.
Remove dowel pins (15) from
If necessary.
side.
i.
Remove throttle shaft assembly
(16).
5-54
|
||
|
||
