| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-2
5-12.1.
ALTERNATOR (Continued)
LOCATION/ITEM
ACTION
REMARKS
REMOVAL (Cont)
NOTE
Alternator illustrated is mounted on the inboard engine of the starboard propulsion unit. Alternators on port
propulsion units are mounted differently, but removal procedures are similar.
CLEANING
4.
Clean all foreign matter (oil, grease,
dirt, etc) from alternator and wiring.
DISASSEMBLY
5.
Alternator
a.
Clamp driven pulley (1) in a
Use an old belt
into Sub-
vise.
or suitable rag
Assemblies
to prevent dam-
b.
Remove self-locking nut (2)
age to pulley.
and washer (3) from rotor
A slight rocking
shaft.
motion of the
alternator body
c.
Remove pulley (1) and fan (4).
will help
loosen a tight
d.
Remove key (5) from rotor shaft.
pulley.
e.
Remove two self-tapping screws
(6) and remove rear cover (7) and
cover gasket (8).
f.
Loosen two lock screws (9).
Remove connecting clips from
terminals.
g.
Remove two self-tapping screws
(10), insulator (11), and brush
assembly (12) from the rear housing.
5-160
|
||
|
||
