| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-2
5-12.1.
ALTERNATOR (Continued)
LOCATION/ITEM
ACTION
REMARKS
ASSEMBLY (Cont)
17.
Rear
Refer to General Support Maintenance.
Housing
18.
Alternator
a.
Carefully align front housing
(16) with rotor shaft assembly
(22), and rear housing (17).
b.
Press housings together.
c.
Install washers (14), and
three bolts (13). Tighten
bolts.
CAUTION
If a new brush assembly is being installed, insure that replacement is identical to the original since an error
could cause serious damage to the alternator.
d.
Secure brush assembly (12)
to rear housing (17) with
insulator (11) and two self-
tapping screws (10).
e.
Secure internal field wire
and auxiliary wire to brush
assembly terminals with
two self-tapping screws (9).
f.
Secure rear cover (7) and
cover gasket (8) to rear
housing (17) with two self-
tapping screws (6).
g.
Place key (5) in keyway of
rotor shaft.
h.
Install fan (4).
5-174
|
||
|
||
