| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-2
5-13.5.
ACCUMULATORS (Continued).
LOCATION/ITEM
ACTION
REMARKS
ASSEMBLY (Cont)
e. Push piston half way down
in housing bore.
13.
Oil End
a. Install backup seal rings
Coat seal rings
Cap
(14) to oil end cap (15).
with light
grease BM1546
to hold in place.
b. Slide end cap (15) with oil
Use loading
port into housing (7) beyond
sleeve.
the normal position.
NOTE
Be sure end cap is on side with head of the piston.
c. Install ring segments (13
and 12) and hold in place.
d. Push piston (16) against ,oil
end cap (15) to position end
cap against retainer plate.
e. Install retainer plate (10).
Then, secure end cap (15) with
lockwashers (9), and screws
(8).
14.
Air End
a. Install backup seal rings (14)
Coat seal rings
Cap
to end cap (11).
with light
grease BM1546
to hold in place.
b. Slide end cap (11) into
housing (7) beyond the
normal position.
c. Install ring segments (13
and 12) and hold in place.
d. Apply pneumatic or mechanical
force of 50 PSI (344.7 kpa)
maximum to position end cap
against retainer plate (10).
5-246
|
||
|
||
