| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-2
5-14. ROCKER ARMS, CAM FOLLOWERS AND PUSHRODS (Continued).
LOCATION/ITEM
ACTION
REMARKS
REMOVAL
1.
Exhaust
Manifold
WARNING
All piping and exhaust lines shall be treated as being insulated with asbestos
material. Protective clothing and respirators shall be worn at all times when handling
suspect asbestos-covered piping and exhaust lines.
If engines have been running, make sure exhaust system has cooled sufficiently
prior to performing any maintenance. Improper handling could result in serious
burns to personnel.
a. Drain the cooling system to a level below the cylinder head.
b. Open the drain cock (1) installed in the bottom of the exhaust manifold (2).
c. Remove nuts (3) and lockwashers (4).
d. Remove the water outlet tube (5) and gasket (6).
e. Remove the water inlet tube (7) and gasket (8).
2. Exhaust
a. Remove nuts (9), lockwashers
Pipe
(10), bolts (11), and flatwashers (12).
b. Remove exhaust pipe (13) and gaskets (14).
3. Exhaust
a. Remove nuts (15), lockwashers Manifold (16),
manifold
flatwashers (17), and
crab brackets (18).
b. Remove manifold (2) and
Discard gaskets.
gaskets (19 and 20).
5-266
|
||
|
||
