Tweet |
Custom Search
|
|
|
||
TM 55-1905-221-14-2
5-14.
ROCKER ARMS, CAM FOLLOWERS AND PUSHRODS (Continued).
LOCATION/ITEM
ACTION
REMARKS
ADJUSTMENTS (Cont)
g.
If check as outlined below
shows top no-load speeds to
be different on the two
governors, correct as follows:
1.
With both engines warmed
up, stop engines and
disconnect throttle
control rod (6) for "B"
engine by removing pin at
clevis (7).
2.
Start "D" engine, declutch
and move master throttle
to "FULL" open position.
3.
Note and record maximum
no-load speed as indicated
by tachometer.
4.
Stop engine and connect
throttle control tube "B"
engine and disconnect "D"
engine.
5.
Start "B" engine, declutch,
and with master throttle
in "FULL" open position,
note and record speed.
6.
If no-load speeds of the
two engines are not
the same, increase the
speed of low engine by
adding shims (8) between
the high speed spring
(9), and the spring
plunger (10).
5-328
|
||