| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-2
5-14.
ROCKER ARMS, CAM FOLLOWERS AND PUSHRODS (Continued).
LOCATION/ITEM
ACTION
REMARKS
ADJUSTMENTS (Cont)
3.
Unlock and move master
throttle to "FULL" open
position. In the "FULL"
open position, without
strain on the throttle
linkage, the pins in
the throttle control
levers (13) at the governor
covers of both engines
should be within 1/16 inch
(0.159 cm) of the same
distance from end of the
slot in cam. If the levers
are not within this limit,
the chances are that the
governor gaps or the
injector rack adjustments
are not identical on the
two engines and should
be rechecked. The governor
with the pin closest to
the end of the cam slot may
have a "close" gap or
the governor with the pin
farthest from the end of
the cam slot may have the
injector racks too "tight".
If adjustments are necessary,
recheck engine speeds
after making adjustments.
5-331
|
||
|
||
