| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-2
5-15.
CYLINDER HEAD (Continued).
LOCATION/ITEM
ACTION
REMARKS
REPAIR/REPLACEMENT (Cont)
will affect the flatness of the
head. Therefore, check the
bottom (fire deck) of the
cylinder head for flatness as
follows:
1.
Use a heavy, accurate
straight-edge, and feeler
gage to check for transverse
warpage at each end and
between all cylinders. Also,
check for longitudinal
warpage in six places as
shown. Maximum allowable
warpage is given by the
following:
Maximum Longitudinal
Maximum Transverse
Warpage
Warpage
.010 inch
.004 inch
(0.025 cm)
(10.16 cm)
5-360
|
||
|
||
