| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-2
5-15. CYLINDER HEAD (Continued).
LOCATION/ITEM
ACTION
REMARKS
REPAIR/REPLACEMENT (Cont)
9.
Rocker
Refer to paragraph 2-14 - ASSEMBLY.
Arms,
Cam
Followers
And
Pushrods
10.
Cylinder
Head
NOTE
The following inspections shall be made just prior to installing the cylinder head onto
the engine. Make these inspections regardless of whether the head was removed
from the engine for servicing only the head assembly, or to facilitate others repairs to
the engine.
a. Check the cylinder head studs
for damaged threads.
b. Check for extruded areas
around the stud holes in the
cylinder block.
c. Check the cylinder liner
height with relationship to
the cylinder block.
d. Check to be sure tops of the
pistons are clean and free of
foreign material.
e. Check to see that ALL the
pushrods are threaded into
their clevises until ends of
the pushrods project through
the clevises. This is impor-
tant since serious engine
damage will be prevented when
the engine is cranked or
barred-over during tune-up.
5-381
|
||
|
||
