| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-2
5-18. FUEL INJECTOR (Continued).
LOCATION/ ITEM
ACTION
REMARKS
INSPECTION
17.
Inspect plunger for scoring, erosion,
chipping, wear at helix, or sharp edges.
REPAIR
18.
a. Replace filters, and cap
gaskets.
b. Replace defective plungers.
c. Remove sharp edges from
plunger using a 500 grit
stone. Wash plunger after
stoning .
ASSEMBLY
19. Filters
a. Place new elements (4)
Elements have
Into injector body (5).
a dimple on
one end. When
installing
elements always
install element
with the dimple
down.
b. Install compression spring
(3).
c. Install new cap gasket
(2) onto filter cap.
5-422
|
||
|
||
