| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-2
5-18. FUEL INJECTOR (Continued).
LOCATION/ ITEM
ACTION
REMARKS
ASSEMBLY (Cont)
20. Injector
a. Position injector body
Use tool
Plunger
(6) in fixture (spray
J6868-01.
and
tip (7) down).
Follower
Assembly
b. Push control rack (8)
all the way in.
c. Insert free end of
plunger (5) into
injector body.
d. Place stop pin (9)
on injector body so
that bottom coil of
follower spring (10)
rests on narrow flange
of pin.
e. Align slot in follower
with stop pin hole
in injector body.
f. Align flat side of
plunger with flat in
gear.
g. Press down on follower
(4) and at the same
time press stop pin (9)
into position.
h. When in place, spring
(10) will hold stop pin
(9) in place.
5-424
|
||
|
||
