ADJUSTMENT - continued - TM-55-1905-221-14-20444

Custom Search

ADJUSTMENT

TM-55-1905-221-14-2 Landing Craft Mechanized Steel DED Overall Length 74 Feet Mod 1 Mark VIII Navy Design LCM-8 Manual

ADJUSTMENT - continued

TM 55-1905-221-14-2

5-19. INJECTOR CONTROL TUBE (Continued).

LOCATION/ITEM

ACTION

REMARKS

ADJUSTMENT (Cont)

3. Adjust the load limit

screw locknut so the

bottom of the locknut

is 1-3/4 inch (4.45

cm) from the bottom

of the load limit

screw.

4. Loosen load limit

lever clamp bolts so

the lever is free to

turn on the injector

rack control tube.

5. Thread the load limit

screw into the

adjusting screw plate

until the locknut

"bottoms" against

the top of the

plate.

6. Hold the injector

rack control tube in

the FULL FUEL position,

and place the load

limit lever against

the bottom of the

load limit screw.

Then, tighten the

load limit lever

clamp bolts.

7. Check to ensure that

If necessary.

the injector racks

will just go into the

FULL-FUEL position-

readjust the load

limit lever.

5-437