| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-2
5-22. ENGINE COOLING PIPING (Continued).
LOCATION/ ITEM
ACTION
REMARKS
NOTE
Drain engine cooling system prior to removal of any part requiring repair. Wipe all
connections clean before performing maintenance on the piping system.
REPAIR/REPLACE
WARNING
Wear safety goggles when welding to prevent eye injury.
a. Welding must be done by a qualified
welder only.
b. Weld cracks and breaks in piping
and grind smooth.
c. Replace defective hose and clamps.
d. Wipe off excess solder when welding
copper tubing.
e. Replace other parts as required.
Repair or replace the following items.
If necessary
ITEM
DESCRIPTION
1
Hose Clamp, 2-7/8 Inch
2
Hose, 2-3/8 inch ID
3
Hose Clamp, 2-5/8 Inch
4
Hose, 2-1/8 Inch ID
5
Flax Packing
6
Hose Clamp, 7/8 Inch
7
Hose, 5/8 Inch ID
8
Drain Cock
9
Check Valve
10
Globe Valve
11
Water Gage
12
Check Valve
5-459
|
||
|
||
