| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-2
5-30.
TRANSMISSION CONTROL VALVE (Continued).
LOCATION/ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
j.
Place a small wood block 1
inch thick (25.4mm) with a
1/2 inch (12.7mm) hole
drilled through its center
over the end of the shutoff
valve and against the oil
seal as shown. Then, tap the
oil seal (10) straight into
the housing (36) until it is
flush with the outside face
of the housing.
k.
Install other shutoff valve
(12) and oil seal (10) in
the same manner.
5-555
|
||
|
||
