| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-3
6-5.4
STEERING SYSTEM HELM UNIT (Continued)
LOCATION/ITEM
ACTION
REMARKS
ASSEMBLY (Cont)
meter gear star. Hold the plate
and meter gear ring in position
on the assembly while the star
is being installed. Rotate
the meter gear star slightly
to bring the cross slot of the
drive into engagement with the
centering pin and the splined
end of the drive will drop
down against the plate.
b. Place the spacer (22) in posi-
Torque cap-
tion within the end of the
screws evenly
meter gear star. If the spacer
and gradually
does not drop flush with the
to a torque
gear surface, the drive has not
of 150 lb. in.
properly engaged the centering
(17.0 Nm).
pin. RECHECK. Place the meter
end cap (21) over the assembly
and install two capscrews,
finger tight, to maintain
alignment of the parts.
Install all six capscrews
(4).
6-61
|
||
|
||
