| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-3
6-24.
IDLER GEAR.(Continued).
LOCATION/ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
f.
Install the inner spacer ring
(14) on the idler gear hub
(7) so that the oil hole in
the hub is 180" from the gap
in the inner spacer ring.
g. Position the idler gear (9)
with both cups over the hub
and inner bearing cone.
CAUTION
The bearing cones must be supported so as not to load the bearing rollers during this
operation.
h. Press the outer bearing cone
(15) over the hub, while
rotating the gear to seat the
rollers properly between the
cones.
6-381
|
||
|
||
