| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-37. POWER TAKE-OFF ASSEMBLY (Continued).
LOCATION/ITEM
ACTION
REMARKS
INSPECTION (Cont)
h. Check for wear or
Replacement
broken pressure
springs are
plate separator
part of repair
springs. Check the
kit.
spring load on the
springs with a spring
tester. The approxi-
mate free length is
7/8 inch and the
approximate outside
diameter is 3/8
inch. Springs should
be replaced when force
exerted is less than
12 - 15 ft-lbs (16.2 -
20.3 Nm) at 5/8 inch
length.
REASSEMBLY
11. Clutch
a. Place the outer pres-
Use new outer
sure plate (50) on
pressure
the bench with the hub
plate.
end of the pressure
plate up.
b. Place the three pres-
Use new
sure plate separator
springs.
springs (19) in the
holes in the outer
pressure plate (50).
Then, place the one
piece clutch facing
(1) on top of the
pressure plate.
6-759
|
||
|
||
