| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-37. POWER TAKE-OFF ASSEMBLY (Continued).
LOCATION/ITEM
ACTION
REMARKS
REASSEMBLY - CONTINUED (Cont)
CAUTION
Be sure and place the teeth of the chain wrench on top of the key to prevent damage to the drive
shaft while holding the drive shaft from turning. If the key or the shaft is damaged and cannot be
cleaned up, they must be replaced.
g. Tighten the clutch drive
shaft nut (17) to the torque
specified in the table below.
Then, bend the edge of the
lockwasher (34) over against
the flat side of the nut.
Clutch
Nut
Ft-Lb
Nm
Size
Size
8"
1-1/8"-12
165-170
223.7-230.5
6-780
|
||
|
||
