| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-37. POWER TAKE-OFF ASSEMBLY (Continued).
LOCATION/ITEM
ACTION
REMARKS
REASSEMBLY - CONTINUED (Cont)
h. Thread the small end
of the flexible grease
tube (33) in the hole
in the side of the
clutch release sleeve
collar. Then, insert
the opposite end
of the tube through
the hole in the side
of the clutch housing
and install the tube
retaining nut.
Tighten the retaining
nut while holding
the tube nut inside
the clutch housing
from turning. If
removed, install the
grease fitting, (61)
and adaptor (62)
in the tube.
i. Attach the inspection
hole cover (31) and
gasket (32) to the
clutch housing using
screws (30).
6-781
|
||
|
||
