| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-38. TRANSFER GEAR ASSEMBLY (Continued).
LOCATION/ITEM
ACTION
REMARKS
REASSEMBLY (Cont )
b. Install the oil seal (15) in
the driven shaft bearing
retainer (16) as follows:
1.
Support the driven shaft
bearing retainer on the bed
of an arbor press with the
inner (machined) face up.
2.
Apply a thin coat of sealing
compound to the outside
diameter of the oil seal
casing.
3.
Start the oil seal straight
into the bore of the retainer
with the lip of the oil seal
facing up.
4.
Place tool J3154-04 with
suitable plates on top of
the oil seal and under the
ram of the press. Then,
press the oil seal straight
into the retainer until the
plates of the tool contact
the retainer.
6-810
|
||
|
||
