| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-40. FLYWHEEL HOUSING - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION/ITEM
ACTION
REMARKS
INSTALLATION (Cont)
j. Lockwire bolts 3, 1, 6, and
The bolts heads
5, 2, and 4 - Install two
should be lined
lockwires, locking each group
up.
of three bolts together.
NOTE
The idler gear hub and spacer bolts are tightened to 25-40 lb-ft (34.1-54.6 Nm)
torque. The wide range in torque specification permits alignment of the bolt
heads.
6. Flywheel
Install Refer to paragraph 6-39.
7. Flywheel
Check the flywheel housing
Housing
concentricity and bolting flange
face as follows:
a. Thread the base post tightly
Use tool
into one of the tapped holes
J9737.
in the flywheel. Then
assemble the dial indicators
on the base post.
6-915
|
||
|
||
