| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-40. FLYWHEEL HOUSING - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION/ITEM
ACTION
REMARKS
INSTALLATION (Cont)
b. Position the dial
indicators straight and
square with the flywheel
housing bell face and
inside bore of the bell.
Make sure each indicator
has adequate travel in
each direction.
NOTE
If the flywheel extends beyond the housing bell, the bore and face must be
checked separately. Use the special adaptor in the tool set to check the housing
bore.
c Pry the crankshaft
toward one end, play is
in one direction only.
d. Adjust each dial indi-
cator to read zero at
the twelve o'clock
position. Then rotate
the crankshaft one
full revolution,
taking readings at 450
intervals (8 readings
each for the bore and
the bolting flange
face). Stop and remove
the wrench or cranking
bar before recording
each reading to ensure
accuracy. The maximum
total indicator reading
must not exceed .013"
for either the bore or
the face.
6-916
|
||
|
||
