| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-41. POWER TAKE OFF COUPLING AND VIBRATION DAMPER (Continued).
LOCATION/ITEM
ACTION
REMARKS
INSTALLATION (Cont)
e. Install four bolts (25) and
Bolts are 1/2-13
lockwashers (26).
X 2-3/4 inch.
f. Install two bolts (27) and
Bolts are 3/8-16
lockwashers (28).
X 2 inch.
g. Install two bolts (29) and
Bolts are 1/2-13
lockwashers (30).
X 3-1/4 inch.
h. Tighten bolts (25 and 29) to
70-75 lb-ft (94.9-101.7 Nm)
torque. Tighten bolts (27)
to 30-35 lb-ft (40.7-47.5 Nm)
i. If removed, place the vibra-
tion damper rear cone (33)
over the end of the crankshaft
with the tapered end of the
cone facing the front end of
the crankshaft, then slide
the cone through the oil seal
and against the oil slinger.
j. Lower the front end of the
engine so the front engine
supports (24) rest on the
engine base, then install the
bolts (22) and lockwashers
(23) securing the front
engine supports to the engine
base. Tighten the bolts
securely.
6-936
|
||
|
||
