| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-41. POWER TAKE OFF COUPLING AND VIBRATION DAMPER (Continued).
LOCATION/ITEM
ACTION
REMARKS
INSTALLATION (Cont)
p. If the clutch drive adapter
(15 and accessory drive pulley
(9) were removed from the
flange of the coupling (4),
place the accessory drive
pulley against the rear face
of the coupling flange and the
clutch drive adapter against
the front face of the coupling
flange, then install the bolts
(2) and lockwashers (3).
Tighten the bolts after the
coupling and flange assembly
has been installed on the
crankshaft.
q. If removed, place the clutch
Refer to
driving ring against the
clutch drive adapter. Then
install the bolts and lock-
washers. Tighten the bolts
after the coupling assembly
has been installed on the
crankshaft.
r. Install the two Woodruff keys
(10) in the keyways in the
crankshaft.
6-939
|
||
|
||
