| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-222-14
Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
BILGE SYSTEM - Continued
Step 4.
Check to see if bilge pump system valves are lined up improperly.
Open valves.
Step 5.
Check to see if suction strainers are clogged.
Clean suction strainers.
Step 6.
Check to see if bilge pump/motor assembly is inoperative.
Notify direct support maintenance.
STARTING SYSTEM
1. ENGINE DRIVEN RECHARGING PUMP FAILS TO RAISE ACCUMULATOR PRESSURE.
Step 1.
Check to see if oil level in reservoir is low.
Replenish reservoir.
Step 2.
Check for air In the system.
Purge system.
Step 3.
Check to see if suction filter is clogged.
Clean filter element or replace (para 3-13).
Step 4.
Check to see if the hose has burst.
Notify direct support maintenance.
Step 5.
Check to see If engine driven pump is defective.
Notify direct support maintenance.
3-14
|
||
|
||
