INSPECT STEERING SYSTEM RESERVOIR, STRAINERS AND FILTERS

Custom Search

CLEAN RESERVOIR AND STRAINERS

TM-55-1905-222-14 Landing Craft Mechanized (LCM-8) (ROHR and Gunderson Models) (1905-01-284-2647 AND 1905-01-284-2648) Manual

INSPECT RESERVOIR AND STRAINERS

TM 55-1905-222-14

MAINTENANCE OF STEERING SYSTEM

3-10 INSPECT STEERING SYSTEM RESERVOIR, STRAINERS AND FILTERS.

INITIAL SETUP

Tools:

Tool Kit, Mechanic's, Rall

and Marine

Equipment Conditions:

Reference

Engine running, steering pump In operation.

1. INSPECT FILTER INDICATOR

a. With steering system in operation, check indicator (1) on return filter (2). The maximum allowable pressure drop

across the filters is 15 psi. Excessive pressure drop across the filter could indicate dirty oil condition.

b. Shut down LCM-8 prior to inspection of reservoir and strainers.

2. INSPECT RESERVOIR AND STRAINERS.

WARNING

The engine should not be running when performing this

inspection. Injury to personnel may result.

a. Visually inspect the exterior of the steering

reservoir (3) for leaks

b. Clean reservoir top with a clean lint-free cloth

c. With engine and all systems shut- down,

remove sixteen capscrews (4), remove tank

inspection cover (5) and gasket (6) Inspect

gasket (6) for damage Get a new gasket if

necessary.

3-37