| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-222-14
4-7 REPLACE NAVIGATION LIGHT FIXTURES AND SWITCHES (Continued).
REMOVAL
REMOVE ANCHOR/NOT-UNDER-COM-
MAND LIGHT FIXTURE
a.
Unlock locking ring assembly (8) from the base
(9). Lift off lens housing (10), and locking ring
assembly (8).
b.
Remove bulb (11). Remove two screws (12)
securing the bulb holder (13) to the base (9).
c.
Remove wiring from bulb holder (13).
d.
Remove two screws (14) holding cable clamp
assembly (15) to base (13), and remove wiring.
e.
Remove three screws (16), flat washers (17),
lockwashers (18) and nuts (19) from the base (9).
f.
Remove base (9) from the support plate (20).
INSTALLATION
INSTALL ANCHOR/NOT-UNDER-COM-
MAND LIGHT FIXTURE
a.
Secure base (9) to support plate (20) with screws
(16), flat washers (17), lockwashers (18) and nuts
(19).
b.
Pull wiring through base (9) and cable assembly
(15). Connect wiring to bulb holder (13) and
secure cable clamp with screws (14).
c.
Install bulb holder (13) on base (9) and secure with
screws (12).
d.
Install bulb (11).
e.
Install lens housing (10) and locking ring assembly
(8).
4-16
|
||
|
||
