ADJUST THROTTLE LINKAGE

Custom Search

TEST

TM-55-1905-222-14 Landing Craft Mechanized (LCM-8) (ROHR and Gunderson Models) (1905-01-284-2647 AND 1905-01-284-2648) Manual

ADJUST CLUTCH LINKAGE

TM 55-1905-222-14

MAINTENANCE OF THROTTLE CONTROL LINKAGE

4-23

ADJUST THROTTLE LINKAGE.

INITIAL SETUP

Tools:

Equipment Conditions:

Tool Kit, Mechanic's, Rail

Engines shut down

and Marine

ADJUSTMENT

ADJUST THROTTLE LINKAGE

NOTE

The throttle cable attached to the throttle-actuating cam must

operate within the available stroke of the cable (3 inches).

Loosen locknut (1) and hex nut (2). Rotate rod

and socket assembly (3) to lengthen or shorten

the cable (4).

Select appropriate connection point (A, B, C,

D) for the adapter kit on the throttle cam (5). In

order to obtain full handle travel in the speed

range.

Adjust adapter kit cable end (6) in such a

manner to avoid bottoming of the control cable

(4) in either direction.

(1)

Loosen hex nuts (7 and 8) on rod ends (9

and 10).

(2)

Rotate connecting rod (11) in such a

manner to avoid bottoming of the control

cable (4) in either direction.

4-46