| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-222-14
4-22
REPLACE PROPULSION CONTROL HEAD (Continued).
k.
Install cable connector (6) into clevis (2) and tighten jam nut (3).
I.
Secure cable with clamps (5) and screws (4).
TEST
TEST PROPULSION CONTROLS
a.
Check clutch angle from NEUTRAL to AHEAD
and NEUTRAL to ASTERN Angle should be
30
.
b.
Check throttle angle from zero throttle to
full throttle. Angle should be 55.
c.
Pull
out
propulsion
control
handle
approximately 1/4 inch from control housing.
Check throttle angle, (in neutral clutch), from
zero to full throttle. Angle should be 85.
d.
Should adjustment be necessary, see para 4-
23 and 4-24 for adjustment of throttle and
clutch linkages respectively.
4-45
|
||
|
||
