REPLACE THROTTLE LINKAGE

Custom Search

REPAIR

TM-55-1905-222-14 Landing Craft Mechanized (LCM-8) (ROHR and Gunderson Models) (1905-01-284-2647 AND 1905-01-284-2648) Manual

REMOVAL

TM 55-1905-222-14

MAINTENANCE OF PROPULSION CONTROLS AND LINKAGES

5-8 REPLACE THROTTLE LINKAGE.

The throttle linkage consists of the throttle cable extending from the pilothouse control head to the articulator and the

red knob control unit as well as the control rod assembly connecting the governor.

This task covers:

a. Removal

c. Installation

b. Lubrication

INITIAL SETUP

Tools:

Equipment Conditions:

Tool Kit, Mechanic's, Rail

Engine shut down.

and Marine

Materials/Parts:

General Safety Instructions:

Control Unit, Red Knob

The throttle cable is heavy.

P/NA-1585

Therefore, caution should be

Throttle Cable (Part-13', Stbd-9')

exercised when dropping it

P/N B-2260

from the pilothouse.

Articulator

P/N C-2190

REMOVAL

DISCONNECT

THROTTLE

CABLE

FROM

CONTROL HEAD IN PILOTHOUSE.

Remove access plate in pilothouse control console.

Unscrew nut (1) and bolt (2) from cable connector

(3), unscrew screws (4) from cable clamp (5).

Remove throttle cable (6) from throttle extension

kit (7).

Loosen jam nut (8) and remove cable connector

(3).

5-18