| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-222-14
MAINTENANCE OF PROPULSION CONTROLS AND LINKAGES
5-9 REPLACE CLUTCH LINKAGE.
The clutch linkage consists of the clutch cable extending from the pilothouse control head to the articulator and the
black knob control unit as well as the control rod assembly connecting the transmission control valve.
This task covers:
a. Removal
c. Installation
b. Lubrication
INITIAL SETUP
Tools:
Equipment conditions:
Tool Kit, Mechanic's Rail
Engine shut down.
and Marine
Materials/Parts:
General Safety Instructions:
Control Unit, Black Knobs
The clutch cable is heavy. Therefore,
P/N A-1585
caution should be exercised when
Clutch Cable (Port-15', Stbd-12')
dropping it from the pilothouse.
P/N B-2260
Articulator
P/N C-2190
REMOVAL
1.
DISCONNECT CLUTCH CABLE FROM CONTROL
HEAD IN PILOTHOUSE.
a.
Remove access plate in pilothouse control console.
b.
Loosen three screws (1) and remove retainer (2).
c.
Remove pin (3) from cable connector (4) and
retainer plate (5).
d.
Loosen jam nut (6) and remove clutch cable (7)
from cable connector (4).
e.
Loosen two screws (8) and remove cable clamp
(9).
5-22
|
||
|
||
