| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-222-14
5-40
REPLACE BILGE PUMP/HYDRAULIC MOTOR ASSEMBLY (Continued)
2. REMOVE BILGE PUMP
a. Remove union (3) from bilge pump discharge
piping.
b. Remove the four mounting bolts (4) and nuts (5)
from the pedestal.
c. Remove bilge pump/hydraulic motor assembly
(6) from close nipple (7) in suction line.
INSTALLATION
1. INSTALL BILGE PUMP
a. Install bilge pump/hydraulic motor assembly
(6) onto the close nipple (7) in the suction
piping.
b. Secure pump pedestal with mounting bolts (4)
and nuts (5).
c. Re-connect bilge pump discharge piping with
union (3).
2. INSTALL HYDRAULIC MOTOR CONNECTIONS
a. Re-connect hydraulic motor. Inlet piping with
union (2).
b. Re-connect hydraulic motor discharge piping
with elbow (1).
5-102
|
||
|
||
