ASSEMBLY-cont. - TM-55-1905-222-140357

Custom Search

ASSEMBLY-cont.

TM-55-1905-222-14 Landing Craft Mechanized (LCM-8) (ROHR and Gunderson Models) (1905-01-284-2647 AND 1905-01-284-2648) Manual

REPLACE DUPLEX STRAINER (SEA WATER SYSTEM).

TM 55-1905-222-14

5-41 REPAIR BILGE PUMP/HYDRAULIC MOTOR ASSEMBLY (Continued).

h. Install shaft assembly (21) into shaft sleeve

(16).

Install drive clamps (8), bolts (7), lockwashers

(14) and nuts (13), but do not tighten.

Tighten bolts (7) in the drive clamp (8)

assembly.

k. Rotate the drive shaft (29) slowly by hand to

make sure the impeller (15) does not rub or hit

the housing (2).

l.. Adjust impeller clearance if impeller (2) is

rubbing. Loosen bolts (7) in drive clamp

assembly. Move impeller either forward or

back. Use a screwdriver to move impeller (15)

back or move shaft sleeve (16) forward.

m. Install four capscrews (3) and lockwashers (4) to

secure the adapter (5) to the pedestal (6).

5-109