| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-222-14
5-43
REPAIR DUPLEX STRAINERS (SEA WATER SYSTEM) (Continued).
REPAIR
REPAIR STRAINER
a. Replace gaskets (4) Replace
screens (6) as necessary.
b. Straighten distorted threaded rods.
ASSEMBLY
ASSEMBLE STRAINER
a
Install threaded rod (7), if removed.
b
Position gasket (4) in place on body (8) and
insert strainer (6) over rod (7). Use new gasket.
c
Place lucite cylinder (5) on body (8).
d. Place gasket (4) over end of cylinder. Use new
gasket.
e. Install end cap (3) onto cylinder (5) with washer
(2), and wing nut (1).
f.
Assemble other end of strainer in the same
manner.
5-113
|
||
|
||
