| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-222-14
MAINTENANCE OF HYDRAULIC STARTING SYSTEM
5-44 REPLACE RECHARGING PUMP.
This task covers
a. Removal
b.
Installation
INITIAL SETUP
Tools:
Equipment Conditions:
Tool Kit, Mechanic's, Rail
Engine shut down. All fluid pressure on
and Marine
hydraulic starting system released.
Materials/Parts:
General Safety Instructions:
Gasket
Ensure that hydraulic pressure
P/N 202082
in the system is relieved before
working on system.
REMOVAL
WARNING
The fluid pressure in the system must be released prior to servicing the engine-driven pump to
prevent possible injury to personnel or damage to equipment.
REMOVE HYDRAULIC RECHARGING
PUMP
a. Release oil pressure from hydraulic system.
b. Clean all dirt from hydraulic pump and lines.
c. Disconnect outlet hose (1), inlet hose (2), and
return hose (3) at the elbows. Cap the hydraulic
lines.
d. Remove five bolts (4) and lockwashers (5)
mounting pump to engine.
e. Remove pump (6) and gasket (7).
5-114
|
||
|
||
